How Can I fix "new device is high" in KL630
When I connect my KL630 via USB, sometimes the text appears infinitely, as shown in the image above.
How Can I fix it?
The discussion has been closed due to inactivity. To continue with the topic, please feel free to post a new discussion.
Comments
Hi Seongyun,
We've never encountered this situation. Could you describe in detail how you connected your KL630 via USB so we could try reproducing the error? Thanks!
@Maria Chen
Hi Maria Chen!
Thank you for your support
When I connected KL630 via USB and power connecter. But The error appears Infinitely..
I think that it usually appears when rebooting the KL630 models, then crash the USB connection codes and other codes.
I don’t know any other reasons.
I found only one solution. It’s just power connecter unplugged about 1minutes. And re-plugged KL630.
Thank you!
Hi seongyunpark,
Please try updating the firmware of the 96board again to see if the issue persists.
Detailed instructions on how to update the firmware can be found in the KL630_96board_User_Manual document.
Thank you.