陳柏錩
陳柏錩
About
- Username
- 陳柏錩
- Joined
- Visits
- 49
- Last Active
- Roles
- Member
Comments
-
https://www.kneron.com/forum/uploads/114/FBV89ALCHL2S.png 我成功產生.nef檔了，請問下一步是怎麼做，才能讓KL520進行推論
-
https://www.kneron.com/forum/uploads/732/GE6GQ00QQ6Z0.png https://www.kneron.com/forum/uploads/528/HHG1J72D1VFQ.png 我執行這一步卻出現error
-
https://www.kneron.com/forum/uploads/759/BOIP3DVUC9LY.png 我做到w3m/data1/kneron_flow/model_fx_report.html這一段沒出現model_fx_report.html
-
https://www.kneron.com/forum/uploads/038/Y1N0R6M43FBB.png 我成功轉換成onnx格式後接下來怎麼換成.nef?
-
https://www.kneron.com/forum/uploads/916/TJP7OKIVIBKB.png 網頁目前是看不到的 https://www.kneron.com/forum/uploads/136/DK0J3VJF3DVZ.png
-
https://www.kneron.com/forum/uploads/971/XQZFN42UI0MS.png
-
https://www.kneron.com/forum/uploads/569/6589V92B08EK.png When I use same way to update the Kl720,I have error code:10,I use Ubuntu 24.04LTS,because I use raspberry pi Buster OS the Raspberry Pi 4 don't have typec port
-
Thank you for your advise,I finish the run_example after your command
-
I build the DFUT tool by myself ,and I use execute the sudo sh DFUT_console,and also can't open https://www.kneron.com/forum/uploads/537/LIJU5GD35319.png ,or execute sudo ./DFUT_console,the commandline display this https://www.kneron.com/forum/uplo…
-
https://www.kneron.com/forum/uploads/426/REN81ZZ16JDF.png
-
像是install Dependency,Kneron Plus, KneronDFUT,等等之類的
-
yes,I use the Raspberry Pi OS-Buster(armv7I 32-bit),but I have the above problem.
-
好的謝謝你，我試試看