ytl0623
ytl0623
About
- Username
- ytl0623
- Joined
- Visits
- 113
- Last Active
- Roles
- Member
Comments
-
嗨，問題解決了，不好意思打擾！ 錯誤發生原因是檔名過長，把專案移到根目錄附近的目錄，再重新 build 就可以了，感謝。
-
嗨，感謝回覆， 後來我決定在 18.04 環境 build C code，但遇到以下 error，想請問是哪裡出問題了? 謝謝。 https://www.kneron.com/forum/uploads/029/2092GI6KA48V.txt
-
嗨，感謝回覆， 後來安裝完Dependency後就可以了，感謝！ 另外，我有嘗試在Ubuntu 20.04做測試但有錯誤 (如下圖)，但官網顯示是可以支援20.04的。 https://www.kneron.com/forum/uploads/221/GSSRZ049CIYJ.png 以上問題請教，謝謝。
-
Hi, 感謝回覆，想請問一下 1. -0.5~0.5 是因為要轉換成 int8 的原因嗎? 2. 請問投影片最後一張是指 models/yolo.py 這個檔案嗎? 另外，是要把原本的 forward function 更改成 modify版本嗎? (但我看行數對不太起來) 以上問題請教，感謝。
-
https://www.kneron.com/forum/discussion/comment/1772#Comment_1772 Problem Solved! Thank you very much! 🙏
-
Problem Solved! Thank you very much!
-
Problem Solved!!! Thank you very much.
-
Problem Solved!!! Thank you very much.
-
Hi, thanks for replying to me. I followed Section 2.1.3 "Using Zadig to Install Driver", but the application didn't detect the KL630 device as "Kneron KL630". Zading only detected KL720 and other USB devices except KL630. How can…
-
Hi, I cannot see the downloaded content due to insufficient permissions (I think). I have sent you an email, please help. Thanks in advance!
-
了解，感謝回覆！！
-
了解，感謝回覆！