Default Avatar

劉峻愷

劉峻愷

About

Username
劉峻愷
Joined
Visits
72
Last Active
Roles
Member, ModeratorsKL520, ModeratorsKL720, ModeratorsAIModel

Comments

  • Hi Dhinesh, Thank you for the clarification. For further assistance regarding the MIPI DSI driver or integration support, please contact our sales team, and they will guide you on the next steps. Best regards, Kevin
    in Request for DSI Test Application on KL730 Comment by 劉峻愷 October 28
  • Hi Dhinesh, If I understand correctly, you are trying to test MIPI TX. However, the DSI (MIPI) driver is not included in the SDK package. If you are using KNEO PI, you may also refer to the KNEO PI website, which includes information about the MIPI …
    in Request for DSI Test Application on KL730 Comment by 劉峻愷 October 27
  • Hi Sathish, This issue is a bug in the Toolchain. Please wait while we update it to the new version. We’ll let you know once the update has been published. Thanks
    in Model conversion error repoted Comment by 劉峻愷 October 22
  • Hi, The power consumption data you’re looking for is in the documents on the official website’s Developer Center Developers | Kneron – Full Stack Edge AI, but you’ll likely need access permissions to view them. If you can’t see the KLX730 HDK menti…
    in KL730 power consumption Comment by 劉峻愷 October 15
  • 您好， 在測試過您的檔案後我們這邊是可以combine成功的，後來發現是您的指令用錯了，正確的指令是需要用引號包住A.nef和B.nef的，像這樣: ./kneron_nef_utils -c "A.nef B.nef"，然後models ID不能一樣。感謝! 下面附上一張測試的圖: https://www.kneron.c…
    in kneo-pi 要如何同時載入多個NEF 來進行推論? Comment by 劉峻愷 October 1
  • 您好， 這樣就有可能是其他問題所造成的，可以麻煩您提供以下的檔案嗎？ -A.nef和B.nef (兩個model ID相同) -A.nef和B.nef (兩個model ID不同) -A和B模型分別轉換成nef時產生的model_fx_report.html 謝謝！
    in kneo-pi 要如何同時載入多個NEF 來進行推論? Comment by 劉峻愷 September 30
  • 您好， 感謝提供的截圖，現在看來combine是沒有成功，失敗的原因可能是因為您兩個NEF都使用了相同的model_id，這可能會導致合併的失敗，建議您可以把其中一個的model_id改成不一樣的 ( 32769, 32770)，然後再combine一次看是否能成功。感謝！
    in kneo-pi 要如何同時載入多個NEF 來進行推論? Comment by 劉峻愷 September 26
  • 您好， 這裡提供另一個方法來得知combine是否成功，可以使用我們kneron_nef_utils裡的 ./kneron_nef_utils --info path/to/file.nef 來Dump NEF Information https://doc.kneron.com/docs/#toolchain/appendix/nef_utils_guide/#4-dump-nef-information 裡面會顯示有…
    in kneo-pi 要如何同時載入多個NEF 來進行推論? Comment by 劉峻愷 September 26
  • 您好， 關於models_730.nef大小問題，只看檔案大小其實是看不太出來是否有成功的，因為檔案大小有這幾種可能性: sizeof ( NEF C ) <= sizeof ( NEF A ) + sizeof ( NEF B ) sizeof ( NEF C ) >= sizeof ( NEF A ) -> 可能會 sizeof ( NEF C ) >= sizeof ( …
    in kneo-pi 要如何同時載入多個NEF 來進行推論? Comment by 劉峻愷 September 25
  • 您好, 成功合併的NEF檔案是會變大的，如需要測試NEF是否成功，可以先使用generic_data_inference來測試看看，如果有問題還需再請您提供一下 error message。 感謝！
    in kneo-pi 要如何同時載入多個NEF 來進行推論? Comment by 劉峻愷 September 24

© Kneron, Inc.