Ethon Lin
Ethon Lin
About
- Username
- Ethon Lin
- Joined
- Visits
- 1,400
- Last Active
- Roles
- Member, ModeratorsKL520, ModeratorsKL720, ModeratorsAIModel
Comments
-
Hello, We checked your status and found out 2 issues: 1. USB port: To execute the PLUS flow, you need to connect the port USB3 on the EVM Board instead. 2. Firmware version: The firmware version in your EVM board is a previous version, please update…
-
Hello, For your request, please contact our PM FC<shihchun.fanchiang@kneron.us> directly to arrange it for you.
-
您好， Sensor移植的部分耐能這邊有專門的團隊可以協助處理，還請您直接聯絡您KL630的購買窗口，屆時將會安排對應的人員協助。
-
For your requirement, maybe NFS is the proper way for you. After you build the ethernet connection between the EVM and your host PC, you can assign a directory to be mounted on the KL730 with the following nfs command: mount -o nolock -t nfs "h…
-
Hello, 1. To set for the Ethernet connection, you have to enter uboot and use "setenv" to set ethaddr, gatewayip and ipaddr in advance. It's not the specific operation for KL730, but the standard command in the uboot / linux environment. 2…
-
Hello, These files are split parts of a single large ZIP archive, not different versions. To extract the SDK correctly: Keep them together: Place both the .001 and .002 files in the exact same folder. Extract the first file only: Right-click only SD…
-
Hello, 1. There are no IDE tools for KL730 SDK, you just need to prepare a host PC and install the toolchain to compile the SDK. /KL730_SDK_v2.0.0/01_BSP/01_Document/KL730_Development_Environment_User_Guide.pdf 2. GETTING STARTED 5. BUILDRO…
-
Hello, I added commands for loading rootfs and confirmed the result. Here are the commands and the uboot.env for your reference. baudrate=115200 bootdelay=3 bootcmd=fatload mmc 0:0 0x800000 Image; fatload mmc 0:0 0x2A00000 leipzig.dtb; fatload mmc 0…
-
Hello, We don't have MX678 VIC/config files for 1080p@60fps and 4CIF@120fps in the SDK. Please contact your purchasing contact to discuss your requirement, we will assess your business details and evualate the possibility of the requirement.
-
Hello, About the corresponding image binaries, you can find them in the following directory of the SDK /KL730_SDK_v2.0.0/04_Firmware/ And you can find the list of specific binaries in chapter 4.1 Firmware Update in KL730_EVM_Board_User_Manual.pdf wh…
-
Hello, 針對您的問題，請參考下面說明 Q1: SDK v1.2.1之後已經經歷了多次改版更新，還請使用最新版的SDK 在SDK v2.0.0中，若推論執行到綁定錯誤KN number的NEF模型，理論上會出現下面錯誤訊息，畫面的部分若是在不同thread下運行的話，確實有可能正常顯示，但uart log…
-
Hello, 1.To change the stream from high profile to main profile, please edit the eProfile setting from VMF_H264ENC_HIGH to VMF_H264ENC_MAIN in the config "VMF_H4E_CONFIG_T". You can find the setting in kdp2_host_stream.c or other example …
-
Hello, There is already a dedicated handler for issues from your company. Please feel free to pass your questions to the contact.
-
Hello, As we know, Seyeon Tech is cooperating with Sangrim Electronics. Since we have arranged direct support for Sangrim Electronics, please feel free to pass your question to Jay (@Sangrim Electronics). Thank you.
-
By the way, you can find more details on the document "KL730_HDK_Board_User_Manual.pdf". Figure 2-2 and Figure 2-3 show the pinout of board HDK and sensor board. https://www.kneron.com/forum/uploads/063/3189UVPXO2ZD.jpg Section 4.5 <R…
-
Hello, If you are using KNEO Pi Camera Module, you need to connect the power of camera sensor on your own. Please follow the instruction of section "KNEO Pi Camera Modules" to connect the cable. https://kneron.github.io/kneopi-documentatio…
-
在切換成usb device後， 資料傳輸是透過Type A，供電的部分可以透過同一條USB線材，但請確保線材支援usb3.0，以免供電不足。 如果要將KNEO Pi接到電腦上通訊，除了連接到電腦端是type A或typeC，連接到730板子端的也會需要是公的 Type A Cable接頭，這部分要請您自行…
-
Hello, Kneo Pi means HDK (HW board) + Arch Linux (UI OS). If you just want to use the HDK to develop without UI OS, please follow the table 4-1 to implement.
-
您好, Kernel Source Code的部分可以在KL730中找到，請登入有下載權限的帳號後再下載 也提醒，需要使用有授權的帳號才可下載SDK，否則進到網頁後會看不到此檔案，因帳號授權須簽屬NDA等相關合約，若沒有權限的話請向購買窗口洽詢 https://www.kneron.com/tw/support/de…
-
KNEO Pi 的定義為 730 HDK (電路板) + arch linux的OS 介面，所以本身就是獨立運作的電腦，且在此模式下，使用者可以在UI OS中做自己的應用，耐能不會協助相關driver / firmware等開發，因此，只能透過網路來彼此串接 若要透過usb來連接到電腦的話，要改成使用HDK (電…
-
Hello, To program flash for board HDK, you need to update all binaries listed in <Table 4-1 Pre-Built Firmware for HDK>. You can find the table and program commands in chapter 4.1 Firmware Update in the HDK document <KL730 Series HDK Board …
-
你好， Kneo-Pi是使用Arch linux的GUI OS，基本上可以視為一台小電腦，若有不同台KNEO Pi要相互通訊，使用網路會是最為便捷的作法
-
Hello, There is already a dedicated handler for issues from your company. Please feel free to pass your questions to the contact.
-
Hello, The pre-built images include the driver for IMX678, but the driver is not in the "kernel" image. You can find the driver IMX678_v1.0.0.5.ko at "/02_APP/02_Software_Tool_Kit/SDK/drivers", but you still need a demo_out to ru…
-
Hi, To update to the latest SDK environment, you can refer to Chapter 4.1 in the "KL730_HDK_Board_User_Manual.pdf" document included in the HDK. (The HDK means board of KNEO Pi.) And in Chapter 4.5 of the "KL730_HDK_Board_User_Manual…
-
Hello, Do you have an account for Developer Center? https://www.kneron.com/en/support/developers/ The download permission depends on the account you login with. If you don't have any account, you should apply for it through the purchase window. Or …
-
Yes, you can use this forum to discuss corresponding issues you encountered. But we don't have the authority to grant you downloading permission. Before you get the contents of the SDK, you should sign some NDA or paper contract. That's why we sugg…
-
Hello, To reach the SDK of KL730, you need to get the permission priorly. Please contact your purchase window to get the authority of access.
-
Hello, The image "kneo_pi_hdk_12G_v1.2.6.img.xz" is for KNEO Pi, which is a GUI OS for users to easily use the provided functions. But user is NOT allowed to develop basic HW functions on KNEO Pi OS. If you want to build driver, please use…
-
你好, API讀取ID的部分請參考kp_scan_devices或kp_get_system_info https://doc.kneron.com/docs/#plus_c_api/api_reference_3.1.2/kp_core.h/#kp_scan_devices https://doc.kneron.com/docs/#plus_c_api/api_reference_3.1.2/kp_core.h/#kp_get_system_info 加密機制…