Comments

• Hi, Thank you for the documentation references. We have reviewed both the EVB schematic (M5S_EVM-SOCKET-3_0.pdf, Page 10) and the Hardware Application Notes (KLM5S3_Hardware_Application_Notes.pdf) and found them very helpful. We will refer to these …

  in Cannot use VIC pins as GPIO output/AGPO on KLM5S3 (KLM550S3) Comment by Yugeshkanna June 2
• Hi, Thank you for the support. Issue is resolved after powering VDDIO_SENSOR_0 via J15. Could you please let us know where this J15 jumper information is documented for future reference? Thanks

  in Cannot use VIC pins as GPIO output/AGPO on KLM5S3 (KLM550S3) Comment by Yugeshkanna June 1
• Hi, Thank you for your response. Yes, we are currently using the KLM550S3 EVM (VATICS2217 EVB-M5S_SOCKET-3.0), not a custom board. Looking forward to your guidance on this issue.

  in Cannot use VIC pins as GPIO output/AGPO on KLM5S3 (KLM550S3) Comment by Yugeshkanna May 27